I've noticed a few things:
1. There is another location on the website where equipment specs are listed (on the "Club Resources" page, at the bottom there is a link to "NADAC Equipment Specifications" under "Rules & Official Handbooks"), and it doesn't match what is in the new document. I noticed that at least the weave pole heights and the barrel sizes don't match, but there could be other mismatches.
2. According to the new equipment spec sheet, the barrels have changed size. The spec used to say 22"-28" in diameter and 24"-42" tall (and in fact, the other spec location still says that), and the new spec says 23"-27" in diameter and at least 28" tall. The barrels I just purchased for use in VT do not meet these new specs, they were at the minimums before.
3. The picture of the hoop is missing from the document.
4. The Non-winged jump specification still lists wood as an option for the jump bars and says the jump supports may be constructed of any solid material, but I thought in the video you said everything must be plastic. Can you clarify?
5. Most places I've trialed, the line on the contact zones has been a stripe of yellow tape, not white as is listed in the new spec sheet. Is this acceptable?
Becky